How To Set Up Gps In Car

How to install a car navigation organization

Go wired properly so you don't get lost

In a nutshell: In this commodity, we'll embrace some of the additional steps needed to install an in-dash navigation receiver across those required for a regular automobile stereo. Nosotros'll talk specifically well-nigh the GPS antenna and extra wire connections.

For the near part, installing an in-nuance navigation receiver is quite like to installing regular touchscreen stereos. Just there are a couple of boosted wrinkles: a GPS antenna and a reverse-direction sensor.

This article volition focus on these extra steps for the navigation receiver'southward installation. After yous've read this article, refer to our Auto Stereo Installation Guide for total details virtually stereo installation.

At the end of the article we'll talk about add together-on navigation modules.

In-dash navigation systems, like the Alpine X308U, provide y'all with large displays and easy touchscreen controls.

GPS antenna installation

There are a couple of uncomplicated rules guiding the external GPS antenna that comes with in-nuance navigation receivers. The beginning is that you lot shouldn't ever cut or otherwise change the antenna in any way. The other is that it needs to be in constant contact with the GPS satellites which orbit the earth, so it should exist mounted in a way that there won't be a lot of interference with its signal.

In almost cases, you tin can mount the GPS antenna most the meridian of the underside of your dash (behind or above the receiver). Satellite signals are then strong and reliable these days that this should be sufficient to maintain reliable reception. It too serves to go along the antenna out of sight.

Alternatively, our tech support experts recommend mounting the GPS antenna either on the dash or along the rear deck. As long as it has a articulate path to the sky and is non too shut to A-pillars or a 2-way antenna, it should work.

However, you lot should consider mounting the antenna on the outside of your vehicle if:

• y'all have a wired rear defroster
• you have metallic window tint
• you have a solar reflective window
• you have a windshield-mounted radio antenna

The GPS antenna should as well be as level as possible and maintain a solid connection to its attached metal plate or canvass, if at that place is one. In that location volition typically exist some sort of adhesive involved to keep the antenna in place. You'll and then need to route the antenna wire to the rear of the receiver forth the dashboard or floorboard or through a window or door seal.

Wire connections

Receivers with a video screen crave a couple of extra wire connections that aren't needed for non-touchscreen stereos. Permit's accept a look at each 1.

Parking brake wire connection

For safe reasons, any video screen in the front end of the car must exist fastened to the parking brake wire. This applies to GPS systems too. Some of the more advanced navigation functions are disabled while the vehicle is in motion. If you want to look upwards a telephone number or change the default settings of the unit, you'll demand to pull over outset. In rare cases, a connection to the foot brake may also exist required.

Reverse betoken wire connection

Many navigation systems too connect to the vehicle's reverse (or dorsum-up light) signal wire — this connection tells the navigation system when the vehicle is traveling in reverse. If this wire is non hooked up, then the vehicle management will not track properly, and the navigation system won't be able to do its task.

The most common way to do this is to connect to the opposite light wire right at the tail light. You'll need to bank check each wire that goes into the tail light with a multimeter. Connect the multimeter to a wire, have someone put the car in contrary (while keeping the brake engaged, of form), and so run into if you get a 12-volt reading. Echo this procedure with each wire until yous observe the right i. (Note: If y'all get a 12-volt reading, make certain it's considering you've constitute the contrary wire, non the brake wire. You lot'll know it's the brake wire if you get a reading as shortly as the brake is pressed.)

The reverse wire can sometimes be constitute under the dash or under the hood, but you'll have to consult your vehicle's wiring diagram carefully in order to place information technology correctly. Borer into it at the taillight tends to be much easier.

Crutchfield can assistance

Our highly trained Technical Support staff can provide parking brake and reverse wire information for most vehicles. They're available seven days a week (have your invoice handy when you contact us). Even if the data is not bachelor for your vehicle, they can still assistance you lot effigy out which wires are the ones you need.

We recommend Posi connectors for wire connections

Posi-Product™ connectors offer a quick and secure twist-on connection for wires, and they tin can exist re-used. For the connections we're talking most here, you'll want a package of Posi-Tap™ connectors. They let yous tap into an existing wire without cutting it. This is our favorite fashion to get strong connections fast. You tin also endeavor soldering or crimping if you feel more comfortable with those methods.

How to apply Posi-Tap connectors

Here is our step-past-stride guide to using Posi-Tap connectors when you demand to tap into a wire in your vehicle.

Footstep one

Each Posi-Tap wire connector splits into three split pieces: big cap (tap end), butt with conductor point, and small cap (accessory end).

Step ii

Insert the tap wire into the large cap and hand tighten into the barrel. The conductor point pierces the tapped wire without compromising its conductive integrity.

Pace 3

Slide the stripped end of the accompaniment wire through the small cap.

Step 4

Tighten the small cap into the end of the barrel, and you're ready to get.

Remote-mount navigation systems

A remote-mount nav system consists of a split navigation module (with an external antenna) that must exist continued to a compatible touchscreen car stereo. Drivers interface with them the same way they would an in-dash arrangement. These are not equally common today, but they're only as effective as in-nuance systems, provided their mapping data is up to engagement and they're properly continued.

The navigation module is basically a box that needs to be installed somewhere out of the way. Today's navigation modules are typically compact enough to be installed in the glove compartment, ofttimes with some sort of velcro fasteners to keep them in identify. They usually have a memory bill of fare slot or USB input to receive map updates. The GPS antenna runs off the module, and can ordinarily be mounted on the nuance. The module requires battery and basis connections, merely like the stereo.

Newer improver navigation modules are compact enough to fit into the glove compartment of most vehicles.

Need aid choosing a navigation receiver?

Installing an in-nuance navigation stereo only requires a couple of actress steps beyond any other stereo installation. If you're set up to start shopping for your ain navigation receiver, use our vehicle fit tool to see which models will work in your car.

If you accept whatever questions, contact our advisors. They're always happy to help and will make sure y'all have everything you demand for the installation.

Source: https://www.crutchfield.ca/learn/car-navigation-gps-install.html

Share this post